uPress-HA Fully Automatic Metallographic Mounting Press

Scan QR

×

Scan QR Code

https://mikrosize.com/product/upress-ha-fully-automatic-metallographic-mounting-press/

Product Features：

Upper mold requires no centering alignment, direct rotation with automatic centering.
Supports mounting 2 samples (single station) or 4 samples (dual station) simultaneously.
Equipped with 7-inch touch screen for operation and display.
One-key start, automatically completes the subsequent sample preparation process.
Built-in storage for 99 sets of mounting processes.
Internal pre-pressing function to avoid sample deformation or crushing under pressure.
Pre-pressing pressure, temperature and time are all adjustable.
High-efficiency heating/cooling system with 2KW heater power.
Mounting temperature adjustable range: 0~200°C.
Water cooling design realizes rapid heat circulation; the shortest mounting time is 6min (φ30mm sample).
Pressure loading by electro-hydraulic system with stable and reliable pressure, pressure range: 0~30MPa.
Simple and effective top sealing mechanism; no manual assistance required for sample ejection.
Automatic stop when the equipment runs to the highest and lowest positions.
Built-in USB interface; mounting process parameters can be imported and exported via U disk.
Switchable Chinese/English display.
Optional single-station and dual-station models.
Compliance with standards: GB/T 13298, ASTM E3-11, ISO 20580.

Product Applications：

Integrative mounting of micro samples to ensure flat sample preparation and complete edge retention.
Hardness gradient, carbide distribution, heat treatment quality and failure analysis.
Inspection of quenched layer, tempered microstructure, fatigue crack, coating layer and metallographic consistency of materials.
Metallographic structure rating, grain size, inclusion,carburized layer/nitrided layer depth detection.