Auto Press 2-30/50/120/400 Dual Mold Cylinder Automatic Mounting Press

Scan QR

×

Scan QR Code

https://mikrosize.com/product/auto-press-2-30-50-120-400-dual-mold-cylinder-automatic-mounting-press/

Product Feature：

• One-touch operation; the whole mounting force including heating, heat preservation, automatic pressure compensation, cooling and unloading is completed automatically.
• High specimen preparation efficiency. Adopting advanced heating technology and optimized cooling system; it takes approximately 7 minutes to mount specimens of Φ30 mm
• (1.18 inches), and about 25 minutes for Model 2-30.
• Dual-Cylinder design with independent operation for each Cylinder.
• Pneumatic pressurization for Model 2-30 & 2-50, hydraulic pressurization for Model 2-120 &2-400; maximum pressure reaches 400 kgf (Model 2-400).
• Standard specimen size: Φ30 mm (1.18″); optional sizes: Φ40 mm (1.57 inches) and Φ50mm (1.97 inches); custom sizes are available.
• Max. heating temperature: 180C for pneumatic models, 200℃ for hydraulic models.
• Equipped with pulse cooling technology for adjustable cooling intensity and water conservation.
• Three optional cooling modes: temperature control, time control and manual control.
• Multiple safety protections; power cuts off automatically in case of overheating.
• The housing is made of high-strength high-temperature resistant composite material, featuring rust resistance and corrosion resistance.
• 7-inch color touch screen for user-friendly operation.
• Real-time display of temperature curve.
• Supports up to 20 sets of mounting recipe settings.
• No need to remove the top cover for quick opening of the mold cavity.
• Comes with hot mounting release agent as standard for easy demoulding after mounting.
• External circulating water tank is available as an accessory.
• Compliant with standards: GB/T 13298, ASTM E3-11, ISO 20580.

Product Application：

• Uniform mounting of miniature samples to ensure flat surface and intact edges.
• Analysis of hardness gradient, carbide distribution, heat treatment quality and failure analysis.
• Inspection of quenched layer, tempered microstructure, fatigue cracks, coating layer and metallographic consistency of materials.
• Rating of metallographic structure, grain size measurement, inclusion analysis, depth detection of carburized layer/nitrided layer.